Emerson unidrive m200 - PID1 Digital Feedback; PID1 Enable Source 2

Parameter 14.026 PID1 Digital Feedback
Short description Defines the value of the digital feedback for PID1
Mode Open‑loop
Minimum -100.00 Maximum 100.00
Default 0.00 Units %
Type 16 Bit User Save Update Rate 4ms read
Display Format Standard Decimal Places 2
Coding RW
See PID1FeedbackSource (14.004).
Parameter 14.027 PID1 Enable Source 2
Short description Defines the input source for enabling PID1
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 0.000 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
See PID1Output (14.001) and UserPIDController (14).
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
209