Emerson unidrive m200 - Drive Warning; Trip 0

Parameter 10.019 Drive Warning
Short description Indicates that one or more of the drive warning alarms are active
Mode Open‑loop
Minimum 0 Maximum 1
Default Units
Type 1 Bit Volatile Update Rate Background write
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT
DriveWarning (10.019) is set to one if any of the drive warnings is active it is defined as
DriveWarning (10.019) = BrakingResistorAlarm (10.012) OR MotorOverloadAlarm (10.017) OR DriveOver-temperatureAlarm (10.018) OR LowACAlarm
(10.107)
Parameter 10.020 Trip 0
Short description Shows the current or last trip to have occurred
Mode Open‑loop
Minimum 0 Maximum 255
Default Units
Type 8 Bit Power Down Save Update Rate Write on trip
Display Format Standard Decimal Places 0
Coding RO, TE, ND, NC, PT, BU
Click here to view trips in numerical order.
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
149