Emerson unidrive m200 - Logic Function 1 Destination; Logic Function 2 Source 1; Logic Function 2 Source 1 Invert; Logic Function 2 Source 2

Parameter 09.010 Logic Function 1 Destination
Short description Defines the output destination of logic function 1
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 0.000 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RW, DE, PT, BU
LogicFunction1Destination (09.010) defines the output destination of logic function 1.
Parameter 09.014 Logic Function 2 Source 1
Short description Defines input source 1 of logic function 2
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 0.000 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
LogicFunction2Source1 (09.014) defines input source 1 of logic function 2.
Parameter 09.015 Logic Function 2 Source 1 Invert
Short description Set to invert input 1 of logic function 2
Mode Open‑loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit User Save Update Rate 4ms read
Display Format Standard Decimal Places 0
Coding RW
Setting LogicFunction2Source1Invert (09.015) inverts input 1 of logic function 2.
Parameter 09.016 Logic Function 2 Source 2
Short description Defines input source 2 of logic function 2
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 0.000 Units
Type 16 Bit User Save Update Rate Drive reset read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
131