Emerson unidrive m200 - Menu 7 Single Line Descriptions − Analog I;O

Menu 7 Single Line Descriptions − Analog I/O
Mode: Open‑loop
Parameter Range Default Type
07.001 Analog Input 1 ±100.00 % RO Num ND NC PT FI
07.002 Analog Input 2 ±100.00 % RO Num ND NC PT FI
07.004 Stack Temperature ±250 °C RO Num ND NC PT
07.005 Auxiliary Temperature ±250 °C RO Num ND NC PT
07.007 Analog Input 1 Mode
4‑20.S (-6), 20‑4.S (-5),
4‑20.L (-4), 20‑4.L (-3),
4‑20.H (-2), 20‑4.H (-1),
0‑20 (0), 20‑0 (1), 4‑20.tr (2),
20‑4.tr (3), 4‑20 (4), 20‑4 (5),
Volt (6)
Volt (6) RW Txt US
07.008 Analog Input 1 Scaling 0.000 to 10.000 1.000 RW Num US
07.009 Analog Input 1 Invert Off (0) or On (1) Off (0) RW Bit US
07.010 Analog Input 1 Destination A 0.000 to 30.999 1.036 RW Num DE PT US
07.011 Analog Input 2 Mode Volt (6), dig (7) Volt (6) RW Txt US
07.012 Analog Input 2 Scaling 0.000 to 10.000 1.000 RW Num US
07.013 Analog Input 2 Invert Off (0) or On (1) Off (0) RW Bit US
07.014 Analog Input 2 Destination A 0.000 to 30.999 1.037 RW Num DE PT US
07.019 Analog Output 1 Source A 0.000 to 30.999 2.001 RW Num PT US
07.020 Analog Output 1 Scaling 0.000 to 40.000 1.000 RW Num US
07.026 Analog Input 1 Preset on Current Loss 4.00 to 20.00 mA 4.00 mA RW Num US
07.028 Analog Input 1 Current Loop Loss Off (0) or On (1) RO Bit ND NC PT
07.030 Analog Input 1 Offset ±100.00 % 0.00 % RW Num US
07.031 Analog Input 2 Offset ±100.00 % 0.00 % RW Num US
07.034 Inverter Temperature ±250 °C RO Num ND NC PT
07.035 Percentage Of d.c. Link Thermal Trip Level 0 to 100 % RO Num ND NC PT
07.036 Percentage Of Drive Thermal Trip Level 0 to 100 % RO Num ND NC PT
07.037 Temperature Nearest To Trip Level 0 to 29999 RO Num ND NC PT
07.046 Thermistor Type
D44081 (0), 84 (1),
PT1000 (2), PT2000 (3),
Other (4)
D44081 (0) RW Txt US
07.047 Thermistor Feedback 0 to 4000 Ω RO Num ND NC PT FI
07.048 Thermistor Trip Threshold 0 to 4000 Ω 3300 Ω RW Num US
07.049 Thermistor Reset Threshold 0 to 4000 Ω 1800 Ω RW Num US
07.050 Thermistor Temperature -50 to 300 °C RO Num ND NC PT FI
07.051 Analog Input 1 Control 0 to 5 0 RW Num US
07.052 Analog Input 2 Control 0 to 5 0 RW Num US
07.055 Analog Output 1 Control 0 to 15 0 RW Num US
07.061 Analog Input 1 Minimum Reference 0.00 to 100.00 % 0.00 % RW Num US
07.062 Analog Input 1 At Minimum Reference ±100.00 % 0.00 % RW Num US
07.063 Analog Input 1 Maximum Reference 0.00 to 100.00 % 100.00 % RW Num US
07.064 Analog Input 1 At Maximum Reference ±100.00 % 100.00 % RW Num US
07.065 Analog Input 2 Minimum Reference 0.00 to 100.00 % 0.00 % RW Num US
07.066 Analog Input 2 At Minimum Reference ±100.00 % 0.00 % RW Num US
07.067 Analog Input 2 Maximum Reference 0.00 to 100.00 % 100.00 % RW Num US
07.068 Analog Input 2 At Maximum Reference ±100.00 % 100.00 % RW Num US
07.090 Analog Input 1 Destination B 0.000 to 30.999 RO Num DE NC PT US
07.094 Analog Input 2 Destination B 0.000 to 30.999 RO Num DE NC PT US
07.099 Analog Output 1 Source B 0.000 to 30.999 RO Num ND NC PT US
RW Read / Write RO Read-only Bit Bit parameter Txt Text string Date Date parameter Time Time parameter
Chr Character parameter Bin Binary parameter IP IP address Mac MAC address Ver Version number SMP Slot, menu, parameter
Num Number parameter DE Destination ND
No
default value
RA Rating dependent NC Non-copyable PT Protected
FI Filtered US User save PS
Power-
down save
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
99