Menu 18 − Application Menu 1
Mode: Open‑loop
General option module application menus
Menus 18 and 20 are general application menus that can be used by one of the option modules fitted to the drive. These menus are customisable and
the following RAM is provided to be shared between the 2 menus.
1 8 16 32
Volatile 0 0 8 9
User save 19 0 19 0
Power-down save 0 0 1 0
If no option modules provide customisation tables for these menus then the drive provides the customisation tables to give the following parameters.
Parameter 18.001 Application Menu 1 Power-down Save Integer
Short description General power-down save integer application parameter
Mode Open‑loop
Minimum -32768 Maximum 32767
Default 0 Units
Type 16 Bit Power Down Save Update Rate N/A
Display Format Standard Decimal Places 0
Coding RW
Parameter 18.002 Application Menu 1 Read-only Integer 2
Short description General read-only integer application parameter
Mode Open‑loop
Minimum -32768 Maximum 32767
Default Units
Type 16 Bit Volatile Update Rate N/A
Display Format Standard Decimal Places 0
Coding RO, PR, ND, NC
Parameter 18.003 Application Menu 1 Read-only Integer 3
Short description General read-only integer application parameter
Mode Open‑loop
Minimum -32768 Maximum 32767
Default Units
Type 16 Bit Volatile Update Rate N/A
Display Format Standard Decimal Places 0
Coding RO, PR, ND, NC
Parameter 18.004 Application Menu 1 Read-only Integer 4
Short description General read-only integer application parameter
Mode Open‑loop
Minimum -32768 Maximum 32767
Default Units
Type 16 Bit Volatile Update Rate N/A
Display Format Standard Decimal Places 0
Coding RO, PR, ND, NC
Parameter 18.005 Application Menu 1 Read-only Integer 5
Short description General read-only integer application parameter
Mode Open‑loop
Minimum -32768 Maximum 32767
Default Units
Type 16 Bit Volatile Update Rate N/A
Display Format Standard Decimal Places 0
Coding RO, PR, ND, NC
To Next Page
Loading...
