Emerson unidrive m200 - Drive Name Characters 1-4; Drive Name Characters 5-8; Drive Name Characters 9-12; Drive Name Characters 13-16;Drive Mode

Parameter 11.079 Drive Name Characters 1-4
Short description Defines characters 1-4 of a string which can be used to identify the drive
Mode Open‑loop
Minimum -2147483648 Maximum 2147483647
Default 757935405 Units
Type 32 Bit User Save Update Rate N/A
Display Format String Decimal Places 0
Coding RW, PT
DriveNameCharacters1-4 (11.079) to DriveNameCharacters13-16 (11.082) can be used to store a 16 character string which can be used to identify
the drive. The string is arranged as shown below.
This uses the standard ASCII character set.
If StatusModeParameter1 (11.018) or StatusModeParameter2 (11.019) are set to 11.079 then the drive name is fully displayed in status view using
DriveNameCharacters1-4 (11.079) to DriveNameCharacters13-16 (11.082). Note that only 15 characters can be displayed on M400 and only 6
characters on M100-M300.
Parameter 11.080 Drive Name Characters 5-8
Short description Defines characters 5-8 of a string which can be used to identify the drive
Mode Open‑loop
Minimum -2147483648 Maximum 2147483647
Default 757935405 Units
Type 32 Bit User Save Update Rate N/A
Display Format String Decimal Places 0
Coding RW, PT
See DriveNameCharacters1-4 (11.079).
Parameter 11.081 Drive Name Characters 9-12
Short description Defines characters 9-12 of a string which can be used to identify the drive
Mode Open‑loop
Minimum -2147483648 Maximum 2147483647
Default 757935405 Units
Type 32 Bit User Save Update Rate N/A
Display Format String Decimal Places 0
Coding RW, PT
See DriveNameCharacters1-4 (11.079).
Parameter 11.082 Drive Name Characters 13-16
Short description Defines characters 13-16 of a string which can be used to identify the drive
Mode Open‑loop
Minimum -2147483648 Maximum 2147483647
Default 757935405 Units
Type 32 Bit User Save Update Rate N/A
Display Format String Decimal Places 0
Coding RW, PT
See DriveNameCharacters1-4 (11.079).
Parameter 11.084 Drive Mode
Short description Defines and displays the current drive mode
Mode Open‑loop
Minimum 1 Maximum 2
Default Units
Type 8 Bit User Save Update Rate Background read/write
Display Format Standard Decimal Places 0
Coding RO, TE, ND, NC, PT
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
187