Emerson unidrive m200 - Preset Select Flag 3; Preset Selector Timer Reset; Reference Selected Indicator; Preset Selected Indicator;Power-Up Keypad Control Mode Reference

Parameter 01.047 Preset Select Flag 3
Short description Defines which preset is selected by the drive
Mode Open‑loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit Volatile Update Rate 4ms read
Display Format Standard Decimal Places 0
Coding RW, NC
See ReferenceSelector (01.014).
Parameter 01.048 Preset Selector Timer Reset
Short description Set to 1 to hold the preset selected indicator at 1
Mode Open‑loop
Minimum 0 Maximum 1
Default 0 Units
Type 1 Bit Volatile Update Rate Background read
Display Format Standard Decimal Places 0
Coding RW, NC
See PresetSelectorTimer (01.016).
Parameter 01.049 Reference Selected Indicator
Short description Displays which reference is currently selected
Mode Open‑loop
Minimum 1 Maximum 6
Default Units
Type 8 Bit Volatile Update Rate 4ms write
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT
See ReferenceSelector (01.014).
Parameter 01.050 Preset Selected Indicator
Short description Displays which preset is currently selected
Mode Open‑loop
Minimum 1 Maximum 8
Default Units
Type 8 Bit Volatile Update Rate 4ms write
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT
See ReferenceSelector (01.014).
Parameter 01.051 Power-up Keypad Control Mode Reference
Short description Defines which value of keypad control mode reference is displayed at power-up
Mode Open‑loop
Minimum 0 Maximum 2
Default 0 Units
Type 8 Bit User Save Update Rate Power-up read
Display Format Standard Decimal Places 0
Coding RW, TE
Value Text Description
0 Reset Keypad reference is zero
1 Last Keypad reference is the last used value
2 Preset Keypad reference is copied from Preset speed 1 (01.21)
Power-upKeypadControlModeReference (01.051) defines the value written to KeypadControlModeReference (01.017) at power-up as given below.
Power-
up Keypad Control Mode Reference
(01.051)
Value wrriten to
Keypad Control Mode Reference
(01.017) at power-up
0 0.0
1
The value in
KeypadControlModeReference
(01.017) at the previous power-down
2
The value saved in PresetReference1
(01.021)
26
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10