Emerson unidrive m200 - Trip 4 Sub-Trip Number; Trip 5 Sub-Trip Number; Trip 6 Sub-Trip Number;Trip 7 Sub-Trip Number; Trip 8 Sub-Trip Number;Trip 9 Sub-Trip Number;Stop Motor

Parameter 10.074 Trip 4 Sub-trip Number
Short description Shows the sub-trip number for trip 4
Mode Open‑loop
Minimum 0 Maximum 65535
Default Units
Type 16 Bit Power Down Save Update Rate Write on trip
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT, BU
See Trip0 (10.020).
Parameter 10.075 Trip 5 Sub-trip Number
Short description Shows the sub-trip number for trip 5
Mode Open‑loop
Minimum 0 Maximum 65535
Default Units
Type 16 Bit Power Down Save Update Rate Write on trip
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT, BU
See Trip0 (10.020).
Parameter 10.076 Trip 6 Sub-trip Number
Short description Shows the sub-trip number for trip 6
Mode Open‑loop
Minimum 0 Maximum 65535
Default Units
Type 16 Bit Power Down Save Update Rate Write on trip
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT, BU
See Trip0 (10.020).
Parameter 10.077 Trip 7 Sub-trip Number
Short description Shows the sub-trip number for trip 7
Mode Open‑loop
Minimum 0 Maximum 65535
Default Units
Type 16 Bit Power Down Save Update Rate Write on trip
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT, BU
See Trip0 (10.020).
Parameter 10.078 Trip 8 Sub-trip Number
Short description Shows the sub-trip number for trip 8
Mode Open‑loop
Minimum 0 Maximum 65535
Default Units
Type 16 Bit Power Down Save Update Rate Write on trip
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT, BU
See Trip0 (10.020).
Parameter 10.079 Trip 9 Sub-trip Number
Short description Shows the sub-trip number for trip 9
Mode Open‑loop
Minimum 0 Maximum 65535
Default Units
Type 16 Bit Power Down Save Update Rate Write on trip
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT, BU
See Trip0 (10.020).
Parameter 10.080 Stop Motor
Short description Indicates that the motor is being stopped before the drive trips
Mode Open‑loop
Minimum 0 Maximum 1
Default Units
Type 1 Bit Volatile Update Rate Background write
Display Format Standard Decimal Places 0
Coding RO, ND, NC, PT
166
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10