Emerson unidrive m200 - Page 237

Parameter 22.052 Parameter 00.052 Set-up
Short description Defines the parameter to be shown in 00.052
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 0.000 Units
Type 16 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Parameter 22.053 Parameter 00.053 Set-up
Short description Defines the parameter to be shown in 00.053
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 12.050 Units
Type 16 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Parameter 22.054 Parameter 00.054 Set-up
Short description Defines the parameter to be shown in 00.054
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 12.051 Units
Type 16 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Parameter 22.055 Parameter 00.055 Set-up
Short description Defines the parameter to be shown in 00.055
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 12.041 Units
Type 16 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Parameter 22.056 Parameter 00.056 Set-up
Short description Defines the parameter to be shown in 00.056
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 10.020 Units
Type 16 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Parameter 22.057 Parameter 00.057 Set-up
Short description Defines the parameter to be shown in 00.057
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 10.021 Units
Type 16 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Parameter 22.058 Parameter 00.058 Set-up
Short description Defines the parameter to be shown in 00.058
Mode Open‑loop
Minimum 0.000 Maximum 30.999
Default 10.022 Units
Type 16 Bit User Save Update Rate Background read
Display Format Standard Decimal Places 3
Coding RW, PT, BU
Unidrive M200 Parameter Reference Guide
Issue: 01.05.00.10
237