5. Operation sequence
55300
3/4
55300
Paper advance operation
Exposure Advance Pressure Change Motor 3 operation error.
7. The paper rear end is advanced to the position a specified distance away from the front of the
exposure advance inlet roller.
• Exposure advance pressure change motor 2: ON (inlet pressure slightly released)/OFF
If exposure advance pressure cannot be changed
• ☞ No. 06137-00002
Exposure Advance Pressure Change Motor 2 operation error.
8. The paper rear end is advanced to the position another specified distance away from the front of the
exposure advance inlet roller.
• Exposure advance pressure change motor 2: ON (inlet pressure released)/OFF
If exposure advance pressure cannot be changed
• ☞ No. 06137-00002
Exposure Advance Pressure Change Motor 2 operation error.
Exposure advance pressure change
motor 3
Exposure advance exit roller
G077213
Exposure advance pressure change
motor 2
G077214
Distributed by: minilablaser.com
To Next Page
Loading...