4/6
8. Appendix
80110
80110
Periodically replaced parts
Processor section (PP7700/QSS-3704[F] [SM])
Processor section (common to PP7900/QSS-3705 [F] [EC])
Parts or checking items Description for maintenance Part No. Timing/Standard
replacement
timing
Quantity
Upper guide
Turn roller (EPDM) (No. 2
upper guide)
Check its damage or wear. If it is
damaged or worn, replace it with a new
one.
Check it every six months after three
years has passed. If necessary, replace it
with a new one.
A087423 Three years • [F]: 2
• [SM]: 3
B024363 • [F]: 1
• [SM]: 0
Upper guide
Bearing (upper guide No.2)
Check its damage or wear. If it is
damaged or worn, replace it with a new
one.
Check it every six months after three
years has passed. If necessary, replace it
with a new one.
A032741 Three years 4
A032742 4
Upper guide
Gear (upper guide No. 2)
A050698 1
Upper guide
Bearing (upper guides No.3 to 6)
Check its damage or wear. If it is
damaged or worn, replace it with a new
one.
Check it every six months after three
years has passed. If necessary, replace it
with a new one.
A032741 Three years 4 each
A032742 4 each
Upper guide
Gear (upper guides No. 3 to 6)
A050698 1 each
Upper guide
Turn roller (squeegee roller)
Check its damage or wear. If it is
damaged or worn, replace it with a new
one.
Check it every six months after three
years has passed. If necessary, replace it
with a new one.
A083186 Three years • [SM]: 1
A087421 • [SM]: 1
A087419 • [F]: 2
Upper guide
Bearing (squeezee roller)
Check its damage or wear. If it is
damaged or worn, replace it with a new
one.
Check it every six months after three
years has passed. If necessary, replace it
with a new one.
A032741 Three years 4
A032742 4
Upper guide
Gear (squeegee roller)
A050698 1
Processing rack section
Gear
Check its damage or wear. If it is
damaged or worn, replace it with a new
one.
Check it every six months after three
years has passed. If necessary, replace it
with a new one.
A050696 Three years 6
A050695 6
Processing rack section
Roller holder
A051198 6
Parts or checking items Description for maintenance Part No. Timing/Standard
replacement
timing
Quantity
Replenisher pump
Poppet valve (EPDM)
Check its damage. If it is damaged,
replace it with a new one.
Check it every six months after three
years has passed. If necessary, replace it
with a new one.
I091003 Two years 6
Distributed by: minilablaser.com
To Next Page
Loading...