Instructor User Guide
REFERENCE AIRPORT Tab
REFERENCE AIRPORT Tab
13 Oct 2017
Page 113
9.2.2.4.4.1 Runway List
From the list of runways, tap to select the desired runway for which lighting is to be
adjusted.
9.2.2.4.4.2 All Runway Lights
Tap this dropdown button to expand selection, then select the intensity level for all
lighting categories of the active visual runway.
• Horizon
• Reils
• Centerline
• Touchdown
• Runway
• VLA
• Approach
• Environment lighting
An * indicates when all light intensities are not the same for the selected runway
(Min = 0, Max = 5).
9.2.2.4.4.3 Centerline
Tap this dropdown button to expand selection, then select the centerline lighting
intensity (Min = 0, Max = 5).
9.2.2.4.4.4 Random Intensity
From the Normal state, tap this toggle button to enable the runway lighting system to
have random intensity lighting.
From the Activated state, tap this toggle button to disable the runway lighting system
to have random intensity lighting.
This button affects the lighting of:
• Edge and Ends
• Centerline, and
• TD Zone
To Next Page
Loading...