Fujitsu PRIMERGY RX2530 M4

RX2530 M4 Upgrade and Maintenance Manual 331
Liquid cooling (LC)
12.4.2.3 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 98
12.4.3 Replacing memory modules
12.4.3.1 Preliminary steps
Ê "Locating the defective server" on page 47
Ê "Suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
12.4.3.2 Replacing a memory module
Ê Prepare the memory module, see section "Preparing a memory module" on
page 328.
Ê Remove the memory module, see section "Removing a memory module" on
page 330.
Ê Install the memory module, see section "Installing a memory module" on
page 329.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver (for the riser module)