352 Upgrade and Maintenance Manual RX2530 M4
14.3.3 Replacing the front VGA board
14.3.3.1 Preliminary steps
Ê "Locating the defective server" on page 47
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
Ê "Removing the front panel module" on page 345
14.3.3.2 Removing the defective front VGA board
Ê Remove the front VGA board, see section "Removing the front VGA board"
on page 351.
14.3.3.3 Installing the new front VGA board
Ê Install the front VGA board, see section "Installing the front VGA board" on
page 350.
14.3.3.4 Concluding steps
Ê "Installing the front panel module" on page 346
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver
To Next Page
Loading...
