RX2530 M4 Upgrade and Maintenance Manual 351
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
Ê "Removing the front panel module" on page 345
14.3.2.2 Removing the front VGA board
Figure 262: Removing the front VGA board
Ê Pull out the cable tie (1).
Ê Remove the two screws (2) and remove the front VGA board (3).
14.3.2.3 Installing the dummy cover
Ê Install the dummy cover (see figure 260).
14.3.2.4 Concluding steps
Ê "Installing the front panel module" on page 346
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
To Next Page
Loading...
