Courier Text Col Row Default Setting Available Options
Description
This setting enables or disables the generation of an event for a change of state of output relay contact. Disabling this
setting means that no event
will be generated for any change in logic output state.
Opto Input Event 0B 06 Enabled 0 = Disabled or 1 = Enabled
This setting enables or disables the generation of an event for a change of state of opto-input. Disabling this setting
means that no event will be
generated for any change in logic input state.
General Event 0B 07 Enabled 0 = Disabled or 1 = Enabled
This setting enables or disables the generation of general events. Disabling this setting means that no general events
are generated.
Fault Rec Event 0B 08 Enabled 0 = Disabled or 1 = Enabled
This setting enables or disables the generation of fault record events. Disabling this setting means that no event will be
generated for any fault that produces a fault record.
Maint Rec Event 0B 09 Enabled 0 = Disabled or 1 = Enabled
This setting enables or disables the generation of maintenance record events. Disabling this setting means that no
event will be generated for any
occurrence that produces a maintenance record.
Protection Event 0B 0A Enabled 0 = Disabled or 1 = Enabled
This setting enables or disables the generation of protection events. Disabling this setting means that any operation of
protection elements will not be logged as an event.
Clear Dist Recs 0B 30 No 0= No or 1 = Yes
This allows you to clear distance records
DDB 31 - 0 0B 40 0xFFFFFFFF
32-bit binary flag (data type G27)
1 = event recording Enabled
0 = event recording Disabled
These signals can be included or excluded from being stored as a Courier event record (assuming the DDB is capable
of creating an event)
DDB 63 - 32 0B 41 0xFFFFFFFF
32-bit binary flag (data type G27)
1 = event recording Enabled
0 = event recording Disabled
These signals can be included or excluded from being stored as a Courier event record (assuming the DDB is capable
of creating an event)
DDB 95 - 64 0B 42 0xFFFFFFFF
32-bit binary flag (data type G27)
1 = event recording Enabled
0 = event recording Disabled
These signals can be included or excluded from being stored as a Courier event record (assuming the DDB is capable
of creating an event)
DDB 127 - 96 0B 43 0xFFFFFFFF
32-bit binary flag (data type G27)
1 = event recording Enabled
0 = event recording Disabled
These signals can be included or excluded from being stored as a Courier event record (assuming the DDB is capable
of creating an event)
DDB 159 - 128 0B 44 0xFFFFFFFF
32-bit binary flag (data type G27)
1 = event recording Enabled
0 = event recording Disabled
These signals can be included or excluded from being stored as a Courier event record (assuming the DDB is capable
of creating an event)
DDB 191 - 160 0B 45 0xFFFFFFFF
32-bit binary flag (data type G27)
1 = event recording Enabled
0 = event recording Disabled
MiCOM P747 Chapter 6 - Monitoring and Control
P747-TM-EN-1 145
To Next Page
Loading...
Need help?
General
