1 TEST RECORD
1.1 ENGINEER DETAILS
Item Value
Engineer's name
Commissioning date
Station
Circuit
System Frequency
VT Ratio
CT Ratio
1.2 FRONT PLATE INFORMATION
Item Value
Device
Model number
Serial number
Rated current In
Rated voltage Vn
Auxiliary voltage Vx
1.3 TEST EQUIPMENT
Test Equipment Model Serial Number
Injection test set
Phase angle meter
Phase rotation meter
Insulation tester
Setting application software
IEC 61850 configurator software
DNP3 configurator software
1.4 TESTS WITH PRODUCT DE-ENERGISED
Test Result (mark where appropriate)
Was the IED damaged on visual inspection? Yes / No
Is the rating information correct for installation? Yes / No
Is the case earth installed? Yes / No
Are the current transformer shorting contacts closed? Yes / No / Not checked
Is the insulation resistance >100 MOhms at 500 V DC? Yes / No / Not tested
Wiring checked against diagram? Yes / No
Test block connections checked? Yes / No / N/A
MiCOM P747 Appendix B - Commissioning Record
P747-TM-EN-1 425
To Next Page
Loading...
Need help?
General
