2 HEALTH AND SAFETY
Personnel associated with the equipment must be familiar with the contents of this Safety Information.
When electrical equipment is in operation, dangerous voltages are present in certain parts of the equipment.
Improper use of the equipment and failure to observe warning notices will endanger personnel.
Only qualified personnel may work on or operate the equipment. Qualified personnel are individuals who:
● Are familiar with the installation, commissioning, and operation of the equipment and the system to
which it is being connected.
● Are familiar with accepted safety engineering practises and are authorised to energise and de-
energise equipment in the correct manner.
● Are trained in the care and use of safety apparatus in accordance with safety engineering practises
● Are trained in emergency procedures (first aid).
Although the documentation provides instructions for installing, commissioning and operating the equipment,
it cannot cover all conceivable circumstances. In the event of questions or problems, do not take any action
without proper authorisation. Please contact the appropriate technical sales office and request the necessary
information.
Chapter 2 - Safety Information MiCOM P747
14 P747-TM-EN-1
To Next Page
Loading...
