GE Multilin F650 - Page 379

A-2 F650 Digital Bay Controller GE Multilin
A.1 LOGIC OPERANDS APPENDIX A
A
Digital Inputs Board F (1 to 8)
CONT IP_F_CC1 Input 1 (CC1) Board F
CONT IP_F_CC2 Input 2 (CC2) Board F
... ...
CONT IP_F_CC8 Input 8 (CC8) Board F
Supervision inputs Board F (9 to 16)
CONT IP_F_CC9
(Va_COIL1)
Contact Input 09 (Va_COIL1) for slot F. Input voltage
(Va) detected, Circuit 1. Complete circuit supervised
CONT IP_F_CC10
(Vb_COIL1)
Contact Input 10 (Vb_COIL1) for slot F. Input voltage
(Vb) detected, Circuit 1. Complete circuit supervised
CONT IP_F_CC11
(Va_COIL2)
Contact Input 11 (Va_COIL2) for slot F. Input voltage
(Va) detected, Circuit 2. Complete circuit supervised
CONT IP_F_CC12
(Vb_COIL2)
Contact Input 12 (Vb_COIL2) for slot F. Input voltage
(Vb) detected, Circuit 2. Complete circuit supervised
CONT IP_F_CC13
(O7_SEAL)
Contact Input 13 (07_SEAL) for slot F. Current
detected. Contact output associated with current flow >
100 mA latched
CONT IP_F_CC14
(O8_SEAL)
Contact Input 14 (08_SEAL) for slot F. Current
detected. Contact output associated with current flow >
100 mA latched
CONT IP_F_CC15
(SUP_COIL1)
Contact Input 15 SUP_COIL1) for slot F. Output for
circuit 1 supervision element
CONT IP_F_CC16
(SUP_COIL2)
Contact Input 16 SUP_COIL2) for slot F. Output for
circuit2 supervision element
Output activation signals Board F (8 elements)
CONT OP OPER_F_01 Logic signal for Output 1 activation. Board F
CONT OP OPER_F_02 Logic signal for Output 2 activation. Board F
... ...
CONT OP OPER_F_8 Logic signal for Output 8 activation. Board F
Output Reset Signals Board F (8 elements)
CONT OP RESET_F_01 board F, 01 latched output reset
CONT OP RESET_F_02 board F, 02 latched output reset
... ...
CONT OP RESET_F_08 board F, 08 latched output reset
Contact Output Status Board F (8 elements)
CONT OP_F_01 Contact output 1 Board F operation
CONT OP_F_02 Contact output 2 Board F operation
... ...
CONT OP_F_08 Contact output 8 Board F operation
Board F Status BOARD F STATUS
Board F status: (0) Inactive - There is no
communication with the board (1) Active - There is
communication with the board