GE Multilin F650

F-16 F650 Digital Bay Controller GE Multilin
F.1 FACTORY DEFAULT CONFIGURATION APPENDIX F
F
SETPOINT > CONTROL ELEMENTS > LOCKED ROTOR
LOCKED ROTOR 1 >LOCKED ROTOR 2 >LOCKED ROTOR 3
SETTING DESCRIPTION NAME DEFAULT VALUE STEP RANGE
USER
VALUE
Function permission Function DISABLED N/A [DISABLED – ENABLED]
Input type Input PHASOR(DFT) N/A [PHASOR – RMS]
Full load current Full Load Current 0.5 KA [0.10 : 10.00]
Pickup level Pickup Level 1.01 N/A [1.01 : 109.00]
Trip time Trip Delay 0 s [0.00 : 900.00]
Reset time Reset Delay 0 s [0.00 : 900.00]
Snapshot event generation Snapshot Events ENABLED N/A [DISABLED – ENABLED]
SETPOINT > INPUTS/OUTPUTS > CONTACT I/O >
BOARD F > BOARD G > BOARD H > BOARD J
SETTING DESCRIPTION NAME DEFAULT VALUE STEP RANGE
USER
VALUE
I/O board type (available only for CIO
modules)
I/O Board Type_H NONE N/A
[NONE,
16 INP + 8OUT,
8 INP + 8OUT + SUPV]
Input activation voltage threshold
Group A
Voltage Threshold
A_X
80 1 V [0 : 255]
Input activation voltage threshold
Group B
Voltage Threshold
B_X
80 1 V [0 : 255]
Debounce time for Group A Debounce Time A_X 15 1 ms [1 : 50]
Debounce time for Group B Debounce Time B_X 15 1 ms [1 : 50]
Input type
Input Type_X_CCY
(CCY)
POSITIVE N/A
[POSITIVE-EDGE,
NEGATIVE-EDGE,
POSITIVE,
NEGATIVE]
Input signal time delay
Delay Input
Time_X_CCY (CCY)
0 1 ms [0 : 60000]
Output logic type Output Logic_X_0Z POSITIVE N/A
[POSITIVE,
NEGATIVE]
Output type Output Type_X_0Z NORMAL N/A
[NORMAL,
PULSE,
LATCH]
Output pulse length
Pulse Output
Time_X_0Z
10000 1 ms [0 : 60000]
Snapshot event generation Snapshot Events ENABLED N/A [DISABLED – ENABLED]