GE Multilin F650

GE Multilin F650 Digital Bay Controller F-17
APPENDIX F F.1 FACTORY DEFAULT CONFIGURATION
F
NOTE 2: DESCRIPTION OF X, Y AND Z IN INPUT/OUTPUT BOARDS
X
F, G, H or J, the I/O board name, depending on the Relay model.
F and G are internal Relay boards, and H and J are additional boards available in CIO
modules (remote Bus CAN I/O module).
For the I/O board selection in the relay
model:
I/O BOARD TYPE
ASSOCIATED DIGIT
ENERVISTA 650
SETUP BOARD
SETTINGS
BOARD
TYPE
0NONENone
1 16 INP+ 8OUT Mixed
2
8 INP +8 OUT
+SUPV
Supervisio
n
CCY
Is the name used for inputs in I/O boards
Mixed, 16 digital inputs: CC1….CC16
Supervision: 8 digital inputs: CC1,..., CC8
0Z
Is the name used for the different outputs in I/O boards, 8 outputs available for any of
the two types of board (01,…., 08)
LIST OF TIME OVERCURRENT CURVES AVAILABLE IN
F650
IEEE extremely/very/moderately inverse
IEC Curve A/B/C/Long-Time Inverse/ Short-Time Inverse
IAC extremely/very/normally/moderately inverse
ANSI extremely/very/normally/moderately inverse
I2t
Definite time
Rectifier curve
User Curve - FlexCurve™ A/B/C/D