D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
3-50 Section 3-6 - Configuration
PRELIMINARY
13.)Check that the WLAN Adapter status shows as Connected and that the Signal is available.
14.)Click OK to close the Network Status window.
NOTE: The system is now connected to the desired Wireless Network. In future, as long as the same Wireless
Network is available, connection will be automatic.
NOTE: Whenever connection to a new/different Wireless Network is required, it will be necessary to repeat all
procedures steps above.
To Next Page
Loading...
