GE Vivid S60N - Mechanical Platform Components - Replacement Procedures; Mechanical Assembly Base Console Replacement; Column Main Support Assembly Replacement; Touch Screen Chassis Replacement Procedure

D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-147
PRELIMINARY
Section 8-6
Mechanical Platform Components - Replacement Procedures
8-6-1 Mechanical Assembly Base Console Replacement
NOTE: In the event that the Mechanical Base Console requires replacement, contact the OnLine Center for
instructions.
8-6-2 Column Main Support Assembly Replacement
NOTE: In the event that the Column Main Support Assembly requires replacement, contact the OnLine Center
for instructions.
8-6-3 Mechanical Assembly Interface Base for the Operator Panel Replacement
NOTE: In the event that the Mechanical Assembly Interface Base for the Operator Panel requires replacement,
contact the OnLine Center for instructions.
8-6-4 Touch Screen Chassis Replacement Procedure
NOTE: The Touch Screen Chassis complete with brackets are shown in Figure 8-178.
8-6-4-1 Tools
Phillips screwdriver.
8-6-4-2 Preparation
Shut down the Vivid™ S60/Vivid™ S70 ultrasound unit, as described in Power Shut Down on page 4 - 7.
8-6-4-3 Time Required
45 mins
Figure 8-178 Touch Screen Chassis
FRU Part #
Refer to Table 9-5 on page 9-3.