D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-105
PRELIMINARY
8-5-8-5 CPU Partition Installation Procedure
1) Install the replacement CPU Partition on the BEP gently sliding it into position so that its edge
engages the BEP as shown in the rectangle in Figure 8-129.
2) Secure the CPU Partition with the two securing screws, previously removed.
3.) Re-install the BEP:
4.) Turn ON the system and boot-up.
• BEP Installation Procedure on page 8 - 97
To Next Page
Loading...
