GE Vivid S60N - Peripheral Power Output Cable (Printer to AC Box) Installation Procedure

D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-79
PRELIMINARY
5.) Unplug the Peripheral Power Output Cable (Printer-to-AC Box) from the AC Distribution Box - see
Figure 8-100.
8-4-2-5 Peripheral Power Output Cable (Printer to AC Box) Installation Procedure
1) Plug the new Printer-to-AC Box cable into the rear power socket of the printer.
2) Lead the cable towards the AC Distribution Box at the rear of the system and plug it into the AC
Distribution Box.
3.) Return the Ground screw cable holder to its position at the rear of the system making sure that the
printer cable is behind the Ground cables, as shown in Figure 8-101.
Figure 8-100 Printer Cable Plugged into AC Distribution Box
Figure 8-101 Printer-to-AC Box Cable Positioned Behind the Ground Cables