GE Vivid S60N - Probe Selection Board (PSB); Pencil Connector; Patient I;O Module; Patient I;O (PATIO) Module - Functional Description

D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
Chapter 5 - Components and Function (Theory) 5-23
PRELIMINARY
5-9-4 Probe Selection Board (PSB)
The Probe Selection Board (PSB) enables acquisition and processing of signals from and to probes
connected to the front panel.
The main purpose of the PSB is to select the active probe and transfer the probe data to the cFE Board.
The PSB provides a mechanical and electrical interface for 3 DLP probes, a single RS probe and a
single pencil probe.
5-9-4-1 Pencil Connector
The PSB Pencil Connector supports use of Vivid S5/S6 pencil probes.
5-9-5 Patient I/O Module
5-9-5-1 Patient I/O (PATIO) Module - Functional Description
The PATIO module is part of the basic system configuration, and is responsible for the acquisition of
the ECG and Respiratory Analog signal inputs.