D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
Chapter 3 - System Setup 3-45
PRELIMINARY
NOTE: Do not use any type of wireless network adaptor other than a GE HEALTHCARE-approved adaptor.
When performing this procedure, if preferred use the Touch screen keyboard. Instructions will be
displayed on the Monitor (via the Connectivity utility).
3-8-7-1 Configuring the Wireless Network Adaptor
1.) From the default scanner screen, press CONFIG
(F2) and log on as Adm, as described in Logging
On to the Vivid™ S60/Vivid™ S70 as “ADM” on page 4 - 8.
Monitor Display
Touch Screen Keyboard
To Next Page
Loading...
