D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
8-80 Section 8-4 - Cables - Replacement Procedures
PRELIMINARY
4.) Plug the printer cable into the AC Distribution Box.
5.) Plug the system’s main power cable into the AC Distribution Box.
6.) Install the system covers in the reverse order in which these were removed as described in the
cable removal procedure above.
7.) Refit the following covers: left rear, front, left side:
• Left Rear Cover Installation Procedure on page 8 - 25
• Front Cover Installation Procedure on page 8 - 19
• Air Inlet (Left Side) Cover Installation Procedure on page 8 - 8
To Next Page
Loading...
