D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
3-10 Section 3-3 - Receiving and Unpacking the Equipment
PRELIMINARY
Note: The front side of the carton is re-inforced with wooden guide rails and, when dropped down
in the open position, these form a strong ramp used for wheeling the system out of the
shipping carton.
4.) Remove the packing slip (shipping consignment note) detailing the contents of the shipping carton
and keep close to hand ready to mark the check list - refer to Physical Inspection on page 3 - 14.
5.) From each side, remove the screws securing the scanner to the wooden base.
Figure 3-12 Wheeling Ramp in Upright Position
Wooden Base
Guide Rail
Wheeling Ramp
(in upright position)
To Next Page
Loading...
