LIST (MULTI STEP MODE)
109
Setting statistics
When the comparison function setting is on, the statistics function
can be turned on to calculate the measurement quantity of PASS
and FAIL.
1. Press the Measure button to enter
[MEAS DISPLAY] page, and press the
LIST SET function button on the right
side of the LCD to enter the [LIST
SET] page, and then press the Setup
button to enter [LIST MODE SETUP]
page.
2. Use arrow keys to move cursor and
select STSTISTICS item on the [LIST
MODE SETUP] page.
3. Use option key on the right of the LCD screen
to select a desired item.
Turn off the statistics display
Turn on the statistics display
Clear
statistics
quantity
To Next Page
Loading...
