GW Instek LCR Series - Measure:comparator:state {OFF|ON|0|1; Measure:comparator:state; Measure:comparator:mode <Absolute|Deviation|Percent|0|1|2>188; Measure:comparator:nominal <Nominal Value NR3

LCR-8000 Series User Manual
188
:MEASure:COMParator:STATe {OFF|ON|0|1}
:MEASure:COMParator:STATe?
Function： It sets or queries the COMP enabled/disabled.
Description：:
MEASure:COMParator:STATe?
Return
data When the setup is OFF, it returns 0.
When the setup is ON, it returns 1.
:MEASure:COMParator:MODE
<ABSolute|DEViation|PERCent|0|1|2>
Function： It sets or queries the COMP MODE.
Description：
Set parameter
ABSolute,0|DEViation,1|PERCent,2
Set syntax
:MEASure:COMParator:MODE PERCent
Query syntax
:MEASure:COMParator:MODE?
Return data PERC (Format is in <disc>)
:MEASure:COMParator:NOMinal <nominal value NR3>
:MEASure:COMParator:NOMinal?
Function： It sets or queries the NOMINAL.
Description：
Set syntax
:MEASure:COMParator:NOMinal 1000
:MEASure:COMParator:NOMinal 1K
:MEASure:COMParator:NOMinal 1E+03
Query syntax
:MEASure:COMParator:NOMinal?
Return
data 1.000000E+03 (Format is in <NR3>)