GW Instek LCR Series - Setting LAN PORT

SYSTEM CONFIGURATION
143
Setting LAN PORT
Set LAN port setting.
Steps
1. Press System button at the top right of
the LCD screen to enter the [SYSTEM
CONFIG] setting page.
2. Use up and down arrow keys to select
LAN SETUP on this setting page.
3. Use option key on the right of the LCD screen
to select a desired item.
Available
parameter
OFF
LAN port communication turn off
ON
LAN port communication turn on
LAN SETUP
LAN IP configures
LAN SETUP
setting
4. Use option key on the right of the LCD
screen to select a desired item.