GW Instek LCR Series - Measure:average <Average NR1; Measure:average; Measure:font {Small|Large; Measure:font

COMMAND OVERVIEW
185
:MEASure:AVERage <average NR1>
:MEASure:AVERage?
Function： It sets or queries the AVERAGE.
Description：
Set parameter The value of the Average is {0~64}
Set syntax
:MEASure:AVERageage 10
Query syntax
:MEASure:AVERageage?
Return data 10 (Format is in <NR1>)
:MEASure:FONT {SMALl|LARGe}
:MEASure:FONT?
Function： It sets or queries the FONT SIZE.
Description：
Set parameter
SMALl (small), LARGe (large)
Set syntax
:MEASure:FONT LARGe
Query syntax
:MEASure:FONT?
Return
data LARG (Format is in <disc>)
:MEASure:TRIGger:DELay <delay time NR3/disc>
:MEASure:TRIGger:DELay?
Function： It sets or queries the TRIGGER DELAY.
Description：
Set parameter The value of delay time
is
{0.0~5|MAXimum|MINimum}.
Set syntax
:MEASure:TRIGger:DELay 0.5
:MEASure:TRIGger:DELay 500M
:MEASure:TRIGger:DELay 500MS
:MEASure:TRIGger:DELay 5E-3
:MEASure:TRIGger:DELay MAXimum
:MEASure:TRIGger:DELayMINimum
Query syntax
:MEASure:TRIGger:DELay?
Return data 0.500 (Format is in <NR2>)