GW Instek LCR Series - Sweep:trigger:mode <Repeat|Single|0|1; Sweep:trigger:mode; Sweep:speed {Fast|Medium|Slow|1|2|3; Sweep:speed

LCR-8000 Series User Manual
210
:SWEep:CURRent MAXimum
:SWEep:CURRentMINimum
Query syntax
:SWEep:CURRent?
Return
data 1.000000E+03(Format is in <NR3>)
When the LEVEL setup is not current mode, the data returns
9.9E37.
:
SWEep:TRIGger:MODE
<REPeat|SINGle|0|1>
:SWEep:TRIGger:MODE?
Function： It sets or queries the sweep trigger mode.
Description：
Set parameter REPeat,0 (repeat)，SINGle,1 (single)
Set syntax
:SWEep:TRIGger:MODE SINGle
Query syntax
:SWEep:TRIGger:MODE?
Return
data REP | SING (Format is in <disc>)
:
SWEep:SPEEd
{FAST|MEDium|SLOW|1|2|3}
:SWEep:SPEEd?
Function： It sets or queries the sweep speed.
Description：
Set parameter FAST/1, MEDium/2, SLOW/3
Set syntax
:SWEep:SPEEd
1
:SWEep:SPEEd FAST
Query syntax :
SWEep:SPEEd?
Return data FAST |MED | SLOW (Format is in <disc>)