LCR-8000 Series User Manual
80
Setting keep previous trace
Save sweep graph for part alignment or adjustment.
1. Press the Measure button to enter
[MEAS DISPLAY] page, and then
press the SWEEP function button on
the right side of the LCD to enter the
[SWEEP DISPLAY] page, and press
the Setup button to enter [SWEEP
MODE SETUP] page.
2. Use arrow keys to move the cursor
and select KEEP PREVIOUS TRACE
item on the [SWEEP MODE SETUP]
page.
3. Use option key on the right of the LCD screen
to select a desired item.
To Next Page
Loading...
