GW Instek LCR Series - Sweep:trace {A|B; Sweep:trace; Sweep:function; Ls|Lp|Cs|Cp|Q|D|Rs|Rp|Z|Deg|Rad|R|X|Y|G|B,Off|Ls|Lp|Cs|Cp|Q|D|Rs |Rp|Z|Deg|Rad|R|X|Y|G|B

COMMAND OVERVIEW
211
:SWEep:TRACe {A|B}
:SWEep:TRACe?
Function： It sets or queries which trace is in use.
Description：
Set syntax
:SWEep:TRACe A
Querysyntax
:SWEep:TRACe?
Return data A | B (Format is in <disc>)
:SWEep:FUNCtion
{LS|LP|CS|CP|Q|D|RS|RP|Z|DEG|RAD|R|X|Y|G|B,OFF|LS|LP|CS|CP
|Q|D|RS|RP|Z|DEG|RAD|R|X|Y|G|B }
:SWEep:FUNCtion?
Function： It sets or queries the sweep function.
Description
：
Set parameter The
comma is placed between the two parameters.
The first parameter cannot set to OFF.
Set syntax
:SWEep:FUNCtion Z,DEG
Query syntax
:SWEep:FUNCtion?
Return
data Z,DEG(Format is in <disc>)
:
SWEep:ANALysis:MODel
{A|B|C|D|E|F|G|OFF}
:SWEep:ANALysis:MODel?
Function： It sets or queries the sweep analysis model.
Description
：
Set syntax
:SWEep:ANALysis:MODel B
Query syntax
:SWEep:ANALysis:MODel?
Return data B(Format is in <disc>)