GW Instek LCR Series User Manual

COMMAND OVERVIEW
213
:SWEep:TRACA:PARAmeter
{LS|LP|CS|CP|Q|D|RS|RP|Z|DEG|RAD|R|X|Y|G|B|}
:SWEep:TRACA:PARAmeter?
Function： It sets or queries the parameter of TRACE A
Description
：
Set parameter The first parameter cannot be set to OFF.
Set syntax
:SWEep:TRACA:PARAmeter Z
Query syntax
:SWEep:TRACA:PARAmeter?
Return
data
Z(Format is in <disc>)
:SWEep:TRACA:YAXis {LOGarithm|LINear}
:SWEep:TRACA:YAXis?
Function： It sets or queries the Y-AXIS of TRACE A.
Description：
Set parameter
LOGarithm | LINear
Set syntax
:SWEep:TRACA:YAXis LOGarithm
Query syntax
:SWEep:TRACA:YAXis?
Return data
LOG | LIN (Format is in <disc>)
:SWEep:TRACA:REFerence <value NR3>
:SWEep:TRACA:REFerence?
Function： It sets or queries the REF of TRACE A.
Description：
Set parameter The value can be set when Y-AXIS setup is linear
mode.
Set syntax
:SWEep:TRACA:REFerence 25k
Query syntax
:SWEep:TRACA:REFerence?
Return data
2.500000E+03 (Format is in <NR3>)

GW Instek LCR Series Specifications

General

Brand	GW Instek
Model	LCR Series
Category	Measuring Instruments
Language	English