GW Instek LCR Series - Sweep:start <Startnr3;Disc; Sweep:start; Sweep:stop <Stopnr3;Disc; Sweep:stop

COMMAND OVERVIEW
207
:SWEep:STARt <startNR3/disc>
:SWEep:STARt?
Function： It sets or queries the START.
Description：
Set parameter The start value of frequency is
{10.0~30000000.0|MAXimum|MINimum}.
The start value of
voltage AC
RO 100Ω is
{0.01~2|MAXimum|MINimum}.
The start value of
voltage AC
RO 25Ω is
{0.01~1|MAXimum|MINimum}.
The start value of
current AC
RO 100Ω is
{
0.0002~0.02
|MAXimum|MINimum}.
The start value of
current AC
RO 25Ω is
{
0.0002~0.04
|MAXimum|MINimum}.
Set syntax
:SWEep:STARt 0.5
:SWEep:STARt 500M
:SWEep:STARt 5E-3
:SWEep:STARt MAXimum
:SWEep:STARt MINimum
Query syntax
:SWEep:STARt?
Return
data +5.000000E-01(Format is in <NR3>)
:SWEep:STOP <stopNR3/disc>
:SWEep:STOP?
Function： It sets or queries the STOP.
Description：
Set parameter The stop value of frequency is
{10.0~30000000.0|MAXimum|MINimum}.
The stop value of
voltage AC
RO 100Ω is
{0.01~2|MAXimum|MINimum}.
The stop value of
voltage AC
RO 25Ω is
{0.01~1|MAXimum|MINimum}.
The stop value of
current AC
RO 100Ω is