GW Instek LCR Series - Sweep:analysis:result; Sweep:analysis:calculate; Sweep:srf:series; Sweep:srf:parallel

COMMAND OVERVIEW
219
:SWEep:ANALysis:RESult?
Function： It queries all of the value data and corresponding
frequency | voltage | current of TRACE A and TRACE B.
Description：
Query syntax
:SWEep:ANALysis:RESult?
Return data +1.000000E+03 , +2.212126E-04 , +1.398695E+00 ,
+1.035500E+03 , +2.209532E-04 , +1.446218E+00…(Format is in
<NR3>). It uploads the TRACE A data at the beginning. It start
uploading TRACE B data when finish uploading TRACE A data.
:SWEep:ANALysis:CALCulate?
Function： It queries the data of R1, L1, C1, C0 and R0 which are in
the ANALYSIS mode.
Description：
Query syntax
:SWEep:ANALysis:CALCulate?
Return data +1.076054E+05 , +2.209770E-04 , +2.138633E-11 ,
+1.588589E-01 (Format is in <NR3>).
:SWEep:SRF:SERies?
Function： It queries the SRF fs (self-resonant frequency serial).
Description：
Query syntax
:SWEep:SRF:SERies?
Return
data +2.310130E+06 (Format is in <NR3>).
:SWEep:SRF:PARallel?
Function： It queries the SRF fp (self-resonant frequency parallel).
Description：
Query syntax
:SWEep:SRF:PARallel?
Return
data +2.310130E+06 (Format is in <NR3>).