GW Instek LCR Series - List:comparator:lower <LOWER Limit NR3; List:comparator:lower; List:bin:parameter; Off|Rdc|Ls|Lp|Cs|Cp|Q|D|Rs|Rp|Z|Deg|Rad|R|X|Y|G|B

COMMAND OVERVIEW
199
:LIST:COMParator:LOWER <LOWER limit NR3>
:LIST:COMParator:LOWER?
Function： It sets or queries the LOWER of list mode.
Description：
Set syntax
:LIST:COMParator:
LOWER
-1
:LIST:COMParator:
LOWER
-1000M
:LIST:COMParator:
LOWER
-1E+00
Query syntax
:LIST:COMParator:
LOWER
?
Return
data
-1.000000E+00 (Format is in <NR3>)
:LIST:BIN:PARAmeter
{OFF|RDC|LS|LP|CS|CP|Q|D|RS|RP|Z|DEG|RAD|R|X|Y|G|B|}
:LIST:BIN:PARAmeter?
Function： It sets or queries the BIN Parameter of list mode.，
Description：
Set syntax
:LIST:BIN:PARAmeter Z(only allow the parameter which
is being used under the list mode.)
Query syntax
:LIST:PARAmeter?
Return
data
Z (Format is in <disc>)
:LIST:BIN:NUMBer {2|3|4|5|6|7|8|9|MAXium|MINimum}
:LIST:BIN:NUMBer?
Function： It sets or queries the BIN NUMBER of list mode.
Description：
Set parameter The
value of bin number is
{2~9|MAXimum|MINimum}.
Set syntax
:LIST:NUMBer
4
Query syntax
:LIST:NUMBer?
Return data 4 (Format is in <NR1>)