LCR-8000 Series User Manual
134
Setting frequency
Set whether each SPOT LOAD point is turned on. To use it, set the
measurement frequency.
1. Press the Measure button to enter
[MEAS DISPLAY] page, and then
press the CORR. function button on
the right side of the LCD to enter the
[CORRECTION] page.
2. Use arrow keys to move cursor and
select FREQUENCY item on the
[CORRECTION] page.
3. Use option key on the right of the LCD screen
to select OFF or ON item.
4. If select ON, Use the numeric keypad to enter
the frequency value.
If the SPOT point is not used, be sure to turn off,
otherwise it will affect the measurement results.
To Next Page
Loading...
