GW Instek LCR Series - Sweep:tracb:yaxis {Logarithm|Linear; Sweep:tracb:yaxis; Sweep:tracb:reference <Value NR3; Sweep:tracb:reference

LCR-8000 Series User Manual
216
:SWEep:TRACB:YAXis {LOGarithm|LINear}
:SWEep:TRACB:YAXis?
Function： It sets or queries the Y-AXIS of TRACE A.
Description：
Set parameter
LOGarithm | LINear
Set syntax
:SWEep:TRACB:YAXis LOGarithm
Query syntax
:SWEep:TRACB:YAXis?
Return
data LOG | LIN (Format is in <disc>)
:SWEep:TRACB:REFerence <value NR3>
:SWEep:TRACB:REFerence?
Function： It sets or queries the reference value of TRACE B.
Description：
Set parameter The value can be set when Y-AXIS setup is linear
mode.
Set syntax
:SWEep:TRACB:REFerence 25k
Query syntax
:SWEep:TRACB:REFerence?
Return
data 2.500000E+03 (Format is in <NR3>)
:SWEep:TRACB:POSition {-10 ~ 16|MAXimun|MINimum}
:SWEep:TRACB:POSition?
Function： It sets or queries the position of TRACE B.
Description：
Set parameter
{-10 ~ 16|MAXimun|MINimum}
Set syntax
:SWEep:TRACB:POSition -3
Query syntax
:SWEep:TRACB:POSition?
Return
data -3 (Format is in <NR1>)