GW Instek LCR Series - List:bin:limit <Nominal Value NR3; List:bin:limit; List:trigger:mode {Repeat|Single|Auto; List:trigger:mode

COMMAND OVERVIEW
201
:LIST:BIN:LIMit <nominal value NR3 >
:LIST:BIN:LIMit?
Function： It sets or queries the BIN LIMIT of list mode.
Description：
Set syntax
:LIST:BIN
:BIN:LIMit 0.001,100M,1k,1000k
Query syntax
:LIST:BIN:BIN:LIMit?
Return data +1.000000E-03, +1.000000E-01, +1.000000E+03,
+1.000000E+06 (Format is in <NR3>)
:LIST:TRIGger:MODE {REPeat|SINGle|AUTO}
:LIST:TRIGger:MODE?
Function： It sets or queries the TRIGGER MODE of list mode.
Description：
Set parameter REPeat、SINGle、AUTO
Set syntax
:LIST:TRIGger:MODE AUTO
Query syntax
:LIST:TRIGger:MODE?
Return data AUTO (Format is in <disc>)
:LIST:TRIGger:DELay <delay time NR3/disc>
:LIST:TRIGger:DELay?
Function： It sets or queries the TRIGGER DELAY of list mode.
Description：
Set parameter The
value of delay time is
{0.0~5|MAXimum|MINimum}.
Set syntax
:LIST:TRIGger:DELay 0.5
:LIST:TRIGger:DELay 500M
:LIST:TRIGger:DELay 500MS
:LIST:TRIGger:DELay 5E-3
:LIST:TRIGger:DELay MAXimum
:LIST:TRIGger:DELay MINimum
Query syntax
:LIST:TRIGger:DELay?
Return
data
0.500 (Format is in <NR2>)