LCR-8000 Series User Manual
40
Setting average count
This function is to perform multiple measurements and take an
average result from multiple measurements as the final display
value. The stability and reliability of the measurement results can
be improved by utilizing this function. The number of
measurements can be set from 1 to 64.
1. Press the Setup button to enter
[MEASURE MODE SETUP] page.
2. Use arrow keys to move cursor and
select AVERAGE on the [MEASURE
MODE SETUP] page.
3. Use key pad to input average count value.
This average count setting only works for the AC
measurement parameters, and the DCR
measurement does not perform the averaging
function.
To Next Page
Loading...
