GW Instek LCR Series - Measure:bin:mode <Absolute|Deviation|Percent|0|1|2; Measure:bin:mode; Measure:bin:nominal <Nominal Value NR3; Measure:bin:nominal

COMMAND OVERVIEW
191
:MEASure:BIN:MODE <ABSolute|DEViation|PERCent|0|1|2>
:MEASure:BIN:MODE?
Function： It sets or queries the BIN MODE.
Description：
Set parameter
ABSolute,0|DEViation,1|PERCent,2
Set syntax
:MEASure:BIN:MODE DEViation
Query syntax
:MEASure:BIN:MODE:MODE?
Return data DEV(Format is in <disc>)
:MEASure:BIN:NOMinal <nominal value NR3 >
:MEASure:BIN:NOMinal?
Function： It sets or queries the BIN NOMINAL.
Description：
Set syntax
:MEASure:BIN:NOMinal 1000
:MEASure:BIN:NOMinal 1K
:MEASure:BIN:NOMinal 1E+03
Query syntax
:MEASure:BIN:NOMinal?
Return data 1.000000E+03 (Format is in <NR3>)
:MEASure:BIN:LIMit <nominal value NR3 >
:MEASure:BIN:LIMit?
Function： It sets or queries the BIN LIMIT.
Description：
Set syntax :MEASure:BIN:LIMit 0.001,100M,1k,1000k
Query syntax
:MEASure:BIN:LIMit?
Return
data +1.000000E-03, +1.000000E-01, +1.000000E+03,
+1.000000E+06 (Format is in <NR3>)
:MEASure:FILE:LOAD <filename>
Function： It loads the meter mode's file.
Description：
Set syntax
:MEASure:FILE:LOAD ABC.(load the file “ABC”)