GW Instek LCR Series - Measure:bin:parameter; Off|Rdc|Ls|Lp|Cs|Cp|Q|D|Rs|Rp|Z|Deg|Rad|R|X|Y|G|B|E|U; Measure:bin:number {2|3|4|5|6|7|8|9|Maxium|Minimum; Measure:bin:number

LCR-8000 Series User Manual
190
:MEASure:BIN:PARAmeter
{OFF|RDC|LS|LP|CS|CP|Q|D|RS|RP|Z|DEG|RAD|R|X|Y|G|B|E|U}
:MEASure:BIN:PARAmeter?
Function： It sets or queries the BIN Parameter.
Description：
Set syntax
:MEASure:BIN:PARAmeter Z(only allow the parameter
which is being used
under
the meter mode.)
Query syntax
:MEASure:PARAmeter?
Return
data Z(Format is in <disc>)
:MEASure:BIN:NUMBer {2|3|4|5|6|7|8|9|MAXium|MINimum}
:MEASure:BIN:NUMBer?
Function： It sets or queries the BIN NUMBER.
Description：
Set parameter The
value of bin number is
{2~9|MAXimum|MINimum}.
Set syntax
:MEASure:NUMBer
4
Query syntax
:MEASure:NUMBer?
Return
data 4(Format is in <NR1>)
:MEASure:BIN:METHod
{EQUal|SEQuential|TOLerance|RANDom|0|1|2|3}
:MEASure:BIN:METHod?
Function： It sets or queries the BIN METHOD.
Description：
Set parameter EQUal,0|SEQuential,1|TOLerance,2|RANDom,3
Set syntax
:MEASure:METHod SEQ
Query syntax
:MEASure:METHod?
Return data SEQ(Format is in <disc>)