GW Instek LCR Series - Setting Trace A;B Color

LCR-8000 Series User Manual
82
Setting trace A/B color
Set the display color of trace A or trace B.
Steps
1. Press the Measure button to enter
[MEAS DISPLAY] page, and then
press the SWEEP function button on
the right side of the LCD to enter the
[SWEEP DISPLAY] page, and press
the Setup button to enter [SWEEP
MODE SETUP] page.
2. Use arrow keys to move the cursor
and select TRACE A/B COLOR item
on the [SWEEP MODE SETUP] page.
3. Use option key on the right of the LCD screen
to select a desired color.
Available
parameter
COLOR－
Adjust color down
COLOR＋
Adjust color up