GW Instek LCR Series - Setting RS232 BAUD RATE

SYSTEM CONFIGURATION
141
Setting RS232 BAUD RATE
Set the RS-232 port baud rate. The USB port is the same baud rate
used in VCP mode.
Steps
1. Press System button at the top right of
the LCD screen to enter the [SYSTEM
CONFIG] setting page.
2. Use up and down arrow keys to select
RS232 BAUD RATE on this setting
page.
3. Use option key on the right of the LCD screen
to select a desired item.
Available
parameter
9600
Baud rate is 9600bps
14400
Baud rate is 14400bps
19200
Baud rate is 19200bps
38400
Baud rate is 38400bps
57600
Baud rate is 57600bps
115200
Baud rate is 115200bps