GW Instek LCR Series User Manual

MEASURE (METER MODE)
43
Setting statistics mode
When the comparison function setting is on, the statistics function
can be turned on to calculate the measurement quantity of PASS
and FAIL.
Steps
1. Press the Setup button to enter
[MEASURE MODE SETUP] page.
2. Use arrow keys to move cursor and
select STATISTICS on the
[MEASURE MODE SETUP] page.
3. Use key pad to input average count value.
Available
parameter
OFF
Turn off the statistics display
ON
Turn on the statistics display
CLEAR
Clear statistics quantity

GW Instek LCR Series Specifications

General

Brand	GW Instek
Model	LCR Series
Category	Measuring Instruments
Language	English