GW Instek LCR Series - List:comparator:mode <Absolute|Deviation|Percent|0|1|2; List:comparator:nominal <Nominal Value NR3; List:comparator:nominal; List:comparator:upper <Upper Limit NR3

LCR-8000 Series User Manual
198
:LIST:DELayMINimum
Query syntax
:LIST:DELay?
Return data 0.500 (Format is in <NR2>)
:LIST:COMParator:MODE <ABSolute|DEViation|PERCent|0|1|2>
Function： It sets or queries the COMP MODE of list mode.
Description：
Set parameter
ABSolute,0|DEViation,1|PERCent,2
Set syntax
:MEASure:COMParator:MODE PERCent
Query syntax
:LIST:COMParator:MODE?
Return data PERC (Format is in <disc>)
:LIST:COMParator:NOMinal <nominal value NR3 >
:LIST:COMParator:NOMinal?
Function： It sets or queries the NOMINAL of list mode.
Description：
Set syntax
:LIST:COMParator:NOMinal 1000
:LIST:COMParator:NOMinal 1K
:LIST:COMParator:NOMinal 1E+03
Query syntax
:LIST:COMParator:NOMinal?
Return
data 1.000000E+03 (Format is in <NR3>)
:LIST:COMParator:UPPER <upper limit NR3>
:LIST:COMParator:UPPER?
Function： It sets or queries the UPPER of list mode.
Description：
Set syntax
:LIST:COMParator:UPPER 1
:LIST:COMParator:UPPER1000M
:LIST:COMParator:UPPER 1E+00
Query syntax
:LIST:COMParator:UPPER?
Return data 1.000000E+00 (Format is in <NR3>)